posted
John, I believe I have a guage cluster and harness with a so-so bezel. Let me know if you are interested. I'll go home and look to make sure it is complete. Feel free to call me anytime @ 612-743-8307. We can talk. I may have parts you need, and vice versa.
Posts: 126 | From: Waconia | Registered: Sep 2007
| IP: Logged |
If I something in my inventory, we will figure out the numbers. Probably the only area I could help would be on the steering stuff. The nice part about the bench is you can get three people in the truck. Handy at times. Karl
Posts: 180 | From: Lakeville | Registered: Aug 2006
| IP: Logged |
posted
So they made a 65 with actual guages rather than idiot lights? Shoot, I'd like that too then. I only knew of the three guages, (speedo, tach/clock, and warning lights with gas guage). If something else exists I want one. I'll have to look into that.
All I have is the speedo, clock, gas guage/warning lights) with a harness.
Posts: 126 | From: Waconia | Registered: Sep 2007
| IP: Logged |
posted
Congrats! This was a good move from what Derek told me, and you could sell your 'leftovers' and get back a fair chunk of it!
Posts: 27 | From: Belle Plaine | Registered: May 2006
| IP: Logged |
posted
Sweet. I did not know that. I wonder how hard it would be to scrounge them up. Now I'm interested. But as John mentioned, would the harness be completely different?
Posts: 126 | From: Waconia | Registered: Sep 2007
| IP: Logged |
posted
I have both clusters. I'll have to take a look and see. I know the oil gauge is mechanical so that doesn't change anything and the fuel gauge would be the same. The water gauge uses a different sender but I think the under dash wires would be the same. The only thing I can think of would be the amp gauge needing different wires.
-------------------- 64 Chevelle Convert "Nitrous is for guys who can't build motors" Posts: 75 | From: Mankato | Registered: Sep 2004
| IP: Logged |
posted
John, or anybody interested, I have an assembly manual for a 65 that has the pictures and wiring diagrams of eveything. If you wan tme to scan some pages and e-mail them to you, I would be glad to do it.
Posts: 294 | From: Forest City, IOWA | Registered: Sep 2004
| IP: Logged |
posted
This is a picture of my gauge cluster. You could also buy a tach that goes where the clock is(on my to do list) and the clock goes on top of the dash.
Rob, I will send you the wiring diagrams in an e-mail. You should pick up an assembly manual, it has a ton of great info with pictures for dumb guys like me! Posts: 294 | From: Forest City, IOWA | Registered: Sep 2004
| IP: Logged |
UBBFriend: Email this page to someone!
Printer-friendly view of this topic
![[Razz]](tongue.gif)
