Engine Parts, Misc Chevelle parts for sale - Chevelles Forum
LinkBack Thread Tools
post #1 of 1 (permalink) Old 08-20-2005, 12:55 PM Thread Starter
Join Date: Apr 2005
Location: Camby, IN (SW of Indianapolis)
Posts: 32

Updated and more readable list can be found at


$200 Spintech Mufflers, welded and ready to bolt up to a BBC with Hooker Comp headers, includes the H-pipe. Click for pics. 3” round center inlet, setup for 2.5” oval center outlet, although they are cut off. See details in the pics. These will definately bolt right up in a ‘69 Chevelle with BBC and Hooker Comp headers. I had them installed, but were too loud for me.
SBC Hooker Super Comp Chevelle headers, 1.75” primaries, not coated; $150.00
‘67-9 Camaro SBC 1 5/8” Headers, Ok condition; $50.00

Engine Parts:

BBC Weiand Team G intake manifold, oval port, 4500 carb, looks great, perf cond, Jegs #925-7621, $110.00 (costs $239 new)
BBC Weiand Team G intake manifold, rectangle port, 4150 carb, looks great, perf cond, Jegs #925-7521, $110.00 (costs $239 new)
BBC 781 oval port heads, 1973 casting, 2.30” intake valves, mild porting, $600 firm
BBC valve tall covers, Moroso, chrome, $30
BBC Moroso oil pan, 6 qt, dipstick on driver side, $50 (costs $127 new)
BBC Moroso oil pan, 7 qt, dipstick on driver side, $65 (costs $155 new)
427 BBC aftermarket harmonic balancer, good condition; $50.00
Stock 454 harmonic balancer, good condition; $50.00
SBC Edelbrock Performer RPM intake manifold, looks great, perfect cond, $75 (cost $135 new) - Sale Pending
Holley 750, vaccum advance, single pump, complete, ready to drive, $75 Sale Pending
18.5” flexalite fan (solid mount, plastic, rated to 8,000rpm). Moves lots of air! Perfect condition, $20


SBC Hooker Super Comp Chevelle headers, 1.75” primaries, not coated; $150.00
69 Chevelle bucket PUI (best brand) seat covers, brand new in original packaging, dark blue, complete, perfect condition. $100.00, (costs $175 new)
69 Chevelle (+ other years) sun visors (brand new), dark blue. I accidently bought the wrong pattern! $30 for the pair.
‘69 -’72 Chevelle Rocker Repair Panels, brand new; $50.00
‘69+ Chevelle 283-307 frame engine mounts, powdercoated, $25.00
‘69 Chevelle rear bumper, $25.00
pre -68 SBC driv side alternator mount brackets, brand new; $25.00
‘69 Chevelle Driv side door internals (regulators); $35.00 & $50.00
‘69 Chevelle Hood latch pin (mounts to hood), black powdercoating; $25.00
‘69 Chevelle lower steering column section, fits between the gear box and the steering column; $25.00.
PG shifter linkage, came from a ‘69 307 Malibu; $35.00
’69 Chevelle power bucket seat track; $125
‘69 Chevelle dash panel, good condition, some cracks, but very usable, $50
‘69 Chevelle stock flat hood, excellent condition; $50.00 I will not ship this item.
‘69 Chevelle License Plate light: $15.00
69 Chevelle trunk lid rods (fits various years/makes), $40

67-69 Camaro

69 Camaro spring shackle kit, complete, NEW IN BOX, still in original wrapping, $100.00 (costs $149 new from Year One)
‘67-9 Camaro SBC 1 5/8” Headers, Ok condition; $50.00

Racing related

6pt roll bar kit from Art Morrison, rear bars designed to go through rear package tray, $125. Bought them for my 69 Chevelle, will fit other years/makes, I paid $205 for this kit, and steel prices are way up since then.
5 way racing seat belts, outdated, blue, look great, $25.00
Mickey Thompson Sportsman tires, 31” tall, by 18.5” wide, have about 1,500 miles on them $200 (cost $229 each new)
Wheelie bars, look great, work great, $150 firm (I don’t need them)
12 bolt rear ring and pinion gears, Richmond, 4.33, $100 (costs $289 new) 1 season of use. Great condition, I just wasn’t happy with the ratio for my car.
12 bolt rear ring and pinion gears, Richmond, 5.73, well used, but should work fine $25. Free if you stop by to pick them up. They were a bit too steep for me.
Ford 9” 4.33 Richmond ring and pinion, didn’t break in perfect enough for a street car (for me anyways), would be great at the track though. $100


Set of 4 Chevy Rally trim rings and center caps, $100
‘68 Olds door latch assembly, passenger side; $30.00

Mike’s “no hassle” Buy-back policy:

If you’re not happy with a part you buy from me, simply return it unused within 10 days of receipt, and in the same condition you recieved it, and I’ll refund your purchase price. That means you get to pay shipping both ways, but I’ll buy the part back. I’ll return the payment in the same form you sent it to me, after I get the part back and verify that it’s in the same condition as I sent it out.

Please feel free to ask as many questions as you want.
mjpell is offline  
Sponsored Links

Quick Reply

Register Now

In order to be able to post messages on the Chevelles Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:


Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome